Statie de asfalt stationara second hand Intrame rm-200

STATIE DE ASFALT STATIONARA INTRAME RM-200 220t/ora din 2003

Stationnary Asphalt Batching Plant RM-200 Typee RM-200
Mixer Capacity 2.500 kg Drum Diameter 2.275 mm Drum Length 9.010 mm Production nominal 200 t/h maximum 220 t/h 9.1 COLD FEEDER / Photos (1, 2, 3, 4, 5)/

Cold automatic pre-proportioning of aggregates.

- Number of hoppers: 5
- Model: T80
- Hopper capacity: 10 m3
- Load width: 3.7 m
- No. of feeder motors: 5
- Power of each motor: 2.2 Kw
- Voltage: 220/380 V
- Remote control from the control panel
- Upper-level grid.

COLD FEED CONVEYOR BELT /Photos (6, 7, 8, 9)/

Mounted on the chassis of the previously described unit and located underneath all of the
feeders.

It collects the aggregates proportioned by all of the feeders and transports them to the
intermittent feed belt.

- Width of belt: 800 mm.
- Power of belt drive motor: 7.5 Kw with emergency stop.

9.2 DRYER

Unit made up of all the elements described below:
HOT AGGREGATES ELEVATOR / Photos (10, 11)/

Of the bucket/scoop variety, vertical and enclosed, with a 25 hp motor, with access
ladders, maintenance platform and inspection hatches with security
key.

- Power of the drive motor: 25 hp (1.8 Kw)

- Voltage: 220/380 V

DRYING DRUM / Photos (12, 13, 14, 15, 16 )/

Within this rotating cylinder made of steel plate and insulated

- Diameter: 2,275 mm.
- Length: 9,010 mm.

BURNER / Photo (17)/

Medium pressure

- Manufactured by: Genco.
- Model: AF 60.
- Drive voltage: 380/660 V.
- 60 hp motor.

Fitted with a hood for noise and heat insulation.

9.4 SIFTER

Horizontal, fitted with two trays for four sizes of aggregate plus
rejection. Totally enclosed within a sealed casing equipped with
a dust suction conduit.

- Surface area: 1.8 m x 4.570 m
- Power of the drive motor: 11 Kw.

9.5 HOT AGGREGATES SILO

Consisting of four chambers, with pneumatically driven discharge/unloading
hatches.

- Capacity: 30 tonnes.

9.6 WEIGHING-MIXING UNIT

Includes the three scales for the independent weighing out of the aggregates,
the bitumen and the filler or cement.

9.6.1. MIXER

Consisting of two parallel 20-blade shafts which rotate at 42 rpm and have a capacity of 2,500 Kg.
Driven by a 55 Kw motor.

The internal blades, paddles and cladding are manufactured in wear-proof
cast steel and are replaceable. Pneumatically driven discharge/unloading
hatch.

9.7. BAG FILTER

- Model: FE-RV-396, with 386 bags
- Filtering surface area: 636 m2
- Power of the fan-extractor drive: 110 Kw
Heat insulated using a mineral fibre matting within a metal casing in order
to prevent the effects of condensation.


COMPRESSOR

For cleaning the bags and driving the pneumatic systems of
the entire plant. Mounted inside the chassis of the bag filter.

- Manufactured by: NOVAIR, S.A.
- Model: SC-S35.
- Drive power: 55 Kw.

DRUM.

- Manufactured by: CALDERERAAS IRUSA, S.A.
- Volume: 1 m3.
- Maximum working pressure: 10 Bar.

9.8 SILOS

For intake filler, 30-tonne silo, external pneumatic loading
system, vibratory cleaning filter, silo to scales transporter screw with
5.5 Kw motor. Twenty-five-tonne cylindrical silo for retrieved dust, with
suction tube connected to the aforementioned filter, enclosed bucket elevator driven by a 3 Kw motor, control hopper and rejection tube
for taking leftovers to the silo.

Transporter screw connecting the control hopper with the scales driven by a 4 KW motor and two transporter screws for the dust coming from the filter and for discharge.