Sistem solar Super metal heatpipe solar collector

Specification

Manifold material and thickness A: Black or Sliver aluminum alloy ,thickness 2.0mm
B: Stainless steel 304 2B, thickness 0.8mm

Header pipe material and thickness
Diameter: 32mm, thickness 1.0mm copper pipe

Heat pipe material and thickness
Diameter:14mm, thickness 0.5mm copper pipe

Insulation
Polyurethane foam 50mm or rock wool

Test pressure and work pressure
Test pressure 9Bar, work pressure 6bar to 8bar

Frame material and thickness
A:Aluminum alloy, thickness 2.0mm
B: Stainless steel, thickness 1.2mm

Collector mounting
Flat roof/Slope roof

Inlet and outlet
1/2aa‚¬a„¢aa‚¬a„¢ OR 3/4aa‚¬a„¢aa‚¬a„¢


FeaturesA¯A¼Å¡
1. Reliable, efficient, super metal heat pipes for rapid heat transfer, no water enter into the tube, Freezing resistance: -35aa€zÆ’, it can be used in special cold area.
2. Highest stagnation temperature can reach 250aa€zÆ’
3. With small thermal capacity, it can output power in 5 seconds when temperature up to 25aa€zÆ’
4. High efficiency, at least 10% higher than normal tubes
5. Easy plug-in installation and maintenance.
6. Suitable for mains pressure water (up to 8 bar/116psi)
7. Stable solar conversion throughout the day (tubes passively track the sun)
8. Perfect solar collector for domestic solar water heater systems.
9. Ideal for Large-sized hot water project like swimming pool, school, hotelaa‚¬A¦.

The operation of the solar collector is very simple.
1. Solar Absorption: Solar radiation is absorbed by the evacuated tubes and converted into heat.
2. Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to the header.
3. Solar Energy Storage: Water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 5-10oC / 9-18oF. Throughout the day, the water in the storage tank is gradually heated.