Incarcator acumulatori Compact Duo - Power 6S-Eq Charger

Compact, low-cost 230 / 12 V charge / discharge station with battery management for NC / NiMH batteries consisting of 1 ... 14 cells, LiPo and LiFe packs consisting of 1 ... 6 cells, and 2 ... 12 V Lead-Acid batteries.
With integral Equalizer and BID system.
The universal charger
A small, compact charger unit for charging A´on the move A´ using a 12 Volt supply, or at home using a 100 - 240 V 5 A switch-mode mains PSU. The broad current range of 0.1 to 5 A makes the unit suitable for use with small slow-fly batteries and transmitter / receiver batteries, as well as large drive or flight packs.

Clear display of charge parameters and battery data on the blue backlit LCD screen with two lines of 16 characters.

The integral Equalizer automatically brings the individual cell voltages of the Lithium battery up to the same level. The Equalizer current is approximately 250 mA, and is sufficient for batteries with capacities of more than 5 Ah.

robbe BID system (Battery Identification system) ensures simple, safe operation and automatic storage of essential battery data

Particular advantages: Simply connect the BID key to the charger, and the charge process begins.
- No tiresome searching through the menu for the set-up parameters
- Maximum protection from accidental mis-setting
- Essential battery data is stored in the BID key
Of course, the Power Peak compact charger can also charge batteries not fitted with the BID system.
One BID key is supplied with the charger as standard.

Functions: - Charge - discharge - cycle (discharge -> charge).
- Setting of charge / discharge current, capacity, battery type and cell count.
- Display of charged-in and discharged capacity.
- Display of charge / discharge time.
- Display of input voltage and charge voltage.
- Display of Equalizer - individual cell voltage, optionally as summary (with two decimal points resolution) or as a list function with three decimal points resolution (1/1000 Volt).

NC / NiMH batteries
- 1 ... 14 cells
- The automatic digital Delta-Peak cut-off circuit switches the charge process off at the correct time, and is set up to match NC and NiMH batteries.

Lithium batteries
- 1 ... 6 cells
- Display of individual cell voltages of Lithium batteries
- Automatic charge cut-off circuit using the CC-CV charge method

Lead-Acid batteries
- 1 ... 6 cells (2 ... 12 Volt)
- Automatic charge cut-off using the CC-CV charge method

Specificatii:
Voltaj intrare: 10 - 15 V
Detectia terminarii incarcarii: automatic
Curent incarcare: 0.1 - 5 A (max. 50 W)
Numar de celule pentru acumulatori NiMH: 1 - 14
Numar de celule pentru acumulatorii LiPo, LiFe: 1 - 6
Numar de celule pentru acumulatorii PbAcid: 1 - 6