Fotga studio flash trigger

Fotga studio flash trigger

Specification

1. 4 Channel with hotshoe connector for external flashes
2. PC sync socket for studio flashes
3. Transmitter -- 12V compact accumulator 123A
4. Maximum working distance--30m/100ft (Open area without inference)
5. Standby time -- approximate one year
6. Triggering lift -- Up to 20,000 times
7. Sync speed varied from 1/125s to 1/250s depending on sync speed of flash/strobe and types of cameras
8. Operating frequency – frequency 433MHz
9. Flash compatible: for flash with 3-400v
Usage: Turn your camera mounted hot-shoe or cable flash into a remote off camera flash. Set the channel selector at same position of both transmitter and receiver. Press the test button on transmitter. If the transmitter and the receiver light s turn red, the flash light is in working condition. Mount the transmitter on the hotshoe of camera and you will trigger the flash.
Compatible Models: * Yongnuo Speedlite (all models)
* Canon SpeedLite 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX,
420EX, 420EZ, 380EX
* Nikon SpeedLite SB-900, SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24
* Olympus FL-50, FL-40
* Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
* Sigma 500 DG Super, DG ER-530 Super and EF-530 Super. Press the mode button until "SL" appears in the right and 2x more for "c0" appears in the middle. You can now Read "C0 SL". The flash now works with Tetra. This is the ONLY mode who do react on middle contact. All other, like "TTL", "SL" or "C1 SL" does NOT work with middle contact circuit. This is also no issue. EF-500 DG Super, EF-500 DG ST, EF-430
* Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D
* Flash with voltage from 3-400v
(not good for Minolta and Sony cameras)

Pachetul contine doar trigger-ul.

Pret: 55 RON