Aeromodel avion VECTOR JET 2544

Fast sport jet with 4S EDF power system. Vector - the powered arrow from robbe ! The robbe Vector is free of all scale restrictions, and is optimised for uncompromisingly superb aerodynamics. Form follows function, and nothing else. The robbe Vector flies just as it looks: jetting across the flying field, straight as a die. At the same time it always responds precisely to the sticks without feeling twitchy. The servo-operated rudder provides full control for accurate rolls as well as extended knife-edge passes. In the engine room there is a factory-fitted brushless fan unit, powered by an optional 4S LiPo battery. The power unit can breathe freely due to the functional layout, and the net result is ample thrust in all flight attitudes. Two vertical upward rolls from level flight" Yes, please! Pull out of the reversal, then fast as a bullet down the strip at breath-taking speed before boring a hole in the sun, heading for the next galaxy. With such thrust available, hand-launching is a simple exercise - even without an assistant. Full-throttle, a gentle push from a standing start - and the robbe Vector is straight up there, boring holes in the sky. The high-grip landing skid provides a firm hand-hold for launching, and also protects the Vector from landing damage. Rock-solid in the air, shouldering aside all turbulence. The speed range is enormous: a measured 50 to 160 km/hr with the standard power system - now thatA´s really moving ! At the same time the robbe Vector is docile at low speed, is always fully controllable, and touches down gently on the strip for a smooth landing. SPECIFICATII: Anvergura: 750 mm Lungime: 900 mm Incarcatura aripii: 69 g/dmp Suprafata portanta aripa: 12.2 dmp Masa: 840 g (complet echipat) FUNCTII RC: - Eleroane - Carma - Profundor - Motor CONTINUTUL KIT-ULUI: - Fine-grain Styrofoam fuselage, wings and tail - All airframe components pre-painted, with decals applied - Painted cockpit with clear canopy, dummy pilot and magnet latch - Five 9 g servos installed - 36-size 4S BL outrunner motor - Replaceable D64 mm 5-blade fan already installed - 50 A BL controller with heat-sink - Clear aileron servo well covers - Control surface horns and linkages - Small items including grip area for hand-launching, CFRP wing joiner rod, screws and washers - Multi-lingual illustrated assembly instructions PENTRU A RULA MODELUL, MAI TREBUIE: - Radiocomanda cu minim 4 canale, cu mixer - Acumulator pentru radiocomanda - Acumulator LiPo 14.8V/ 2200 mA/ 25C - Set conectori CT-4 - Incarcator cu cabluri aferente PIESE DE SCHIMB: - Fuselage and motor hatch: cod 25440001 - Wing panels and accessories: cod 25440002 - Tail set: cod 25440003 - Canopy: cod 25440004 - BL motor: cod 25440005 - Fan unit: cod 25440006 - BL controller, 50A: cod 25440007 - Control surface linkage parts: cod 25440008